SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:ULINk:CONFig:PUSCh "<string>"
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:ULINk:CONFig:PUSCh "3;0;0;50;0,0;N/A;N/A;N/A;N/A;0;0;0;0"
Notes	The argument is a positional, semicolon-separated string of 13 fields (no keys): subframe;modType;allocType;rbSize;rbOffset;S0;S1-1;S2;S3-1;nDMRS1;nDMRS2;deltaSS;hopping subframe - uplink subframe number (required) modType - 0 = QPSK, 1 = QAM16, 2 = QAM64 allocType - 0 = Type 0, 1 = Type 1 rbSize - number of resource blocks, 1-100 (Type 0 only; N/A for Type 1) rbOffset - resource-block offset(s) off0,off1, 0-99 (Type 0 only; N/A for Type 1) S0, S1-1, S2, S3-1 - cluster RBG indices (Type 1 only; N/A for Type 0) nDMRS1, nDMRS2 - DMRS cyclic-shift values deltaSS - delta sequence-shift hopping - 0 = Off, 1 = Group, 2 = Sequence All fields except subframe are optional; omitted trailing fields use preset defaults. Use N/A for fields not applicable to the selected allocation type.
Preset	N/A
State Saved	Yes
Initial S/W Revision	A.20.01

Reconfigure PUSCH

Reconfigures an already-added PUSCH physical channel. Equivalent to opening the PUSCH Config dialog and clicking OK.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:ULINk:PCHannel:PUSCh:EDIT "<string>"
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:ULINk:PCHannel:PUSCh:EDIT "0;4;1;0;50;0,0;N/A;N/A;N/A;N/A;0;0;0;0"
Notes	The argument is a positional, semicolon-separated string whose first field is the channel index (0-based), followed by the same 13 fields as Configure PUSCH: channelIdx;subframe;modType;allocType;rbSize;rbOffset;S0;S1-1;S2;S3-1;nDMRS1;nDMRS2;deltaSS;hopping channelIdx - 0-based index of the PUSCH to reconfigure (required) (remaining fields same as Configure PUSCH; all optional except channelIdx & subframe)
Preset	N/A
State Saved	Yes
Initial S/W Revision	A.20.01

Delete PUSCH

Deletes the specified PUSCH physical channel and adjusts the identifying numbers of subsequent channels in the list.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:ULINk:PCHannel:DELete:PUSCh <integer>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:ULINk:PCHannel:DELete:PUSCh 1
Preset	N/A
State Saved	Yes
Initial S/W Revision	A.20.01

General

PUSCH Physical Channel Number

Query only

Displays the identifying number of this PUSCH physical channel. The number is assigned automatically based on the channel's position in the list.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:NUMBer?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:NUMBer?
Preset	1
State Saved	No
Initial S/W Revision	A.20.01

PUSCH State

Enables or disables this PUSCH physical channel instance.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:STATe ON\|OFF\|1\|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:STATe?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:STATe ON RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:STATe?
Preset	On
State Saved	Yes
Initial S/W Revision	A.20.01

PUSCH Power

Sets the PUSCH power relative to the uplink carrier power.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:POWer <value> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:POWer?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:POWer 0 RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:POWer?
Preset	0 dB
State Saved	Yes
Min	-60 dB
Max	20 dB
Initial S/W Revision	A.20.01

PUSCH RNTI

Sets the RNTI for this PUSCH channel.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:RNTI <value>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:RNTI 1
Preset	1
State Saved	Yes
Min	0
Max	65535
Initial S/W Revision	A.20.01

PUSCH Modulation Type

Selects the modulation type for the PUSCH.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:MODulation QPSK\|QAM16\|QAM64
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:MODulation QPSK
Preset	QPSK
State Saved	Yes
Initial S/W Revision	A.20.01

PUSCH Resource Block Collection Numbers

Query only

Displays the numbers of the resource block collection(s) to which this PUSCH physical channel belongs.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:RBC?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:RBC?
Notes	A physical channel occupies one subframe (two slots) and therefore occupies two resource block collections.
Preset	1,2
State Saved	No
Initial S/W Revision	A.20.01

Higher Layer Data

Query only

Displays the data source of a higher-layer-controlled UL PUSCH Channel.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:HLAYer:DATA?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier:UL:PCH:PUSCh:HLAYer:DATA?
Preset	N/A
State Saved	No
Initial S/W Revision	A.20.01

PUSCH Data

Selects PN9, PN15, or User Defined Bits to use for the PUSCH data.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:DATA:TYPE PN9\|PN15\|USER
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:DATA:TYPE PN9
Choices	PN9 \| PN15 \| USER
Preset	PN9
State Saved	Yes
Initial S/W Revision	A.20.01

Data User Defined

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:DATA:USER "<bitstring>" [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:DATA:USER?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier:UL:PCH:PUSCh:DATA:USER "00000000" RADio:LTETdd:WAVeform:CCARrier:UL:PCH:PUSCh:DATA:USER?
Preset	"00000000"
State Saved	Yes
Initial S/W Revision	A.20.01

PUSCH Scrambling

Enables or disables PUSCH scrambling.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:SCRambling ON\|OFF\|1\|0
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:SCRambling ON
Preset	On
State Saved	Yes
Initial S/W Revision	A.20.01

PUSCH DM-RS Power

Sets the PUSCH DM-RS power relative to the carrier power.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:DMRSignal:POWer <value>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:DMRSignal:POWer 0
Preset	0 dB
State Saved	Yes
Min	-60 dB
Max	20 dB
Initial S/W Revision	A.20.01

PUSCH DM-RS N1

Sets the PUSCH DM-RS n1 parameter (cyclic shift).

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:DMRSignal:N1 <value>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:DMRSignal:N1 0
Couplings	None
Preset	0
State Saved	Yes
Min	0
Max	10
Initial S/W Revision	A.20.01

PUSCH nDMRS(2)

Selects a value which is used to calculate the cyclic shift value for the demodulation reference signal (DMRS) for PUSCH.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:DMRSignal:N2 0\|2\|3\|4\|6\|8\|9\|10
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:DMRSignal:N2 0
Choices	0, 2, 3, 4, 6, 8, 9, 10 See 3GPP TS 36.211.
Preset	0
State Saved	Yes
Initial S/W Revision	A.20.01

PUSCH Delta SS

Sets a value which determines the sequence shift pattern for the demodulation reference signal (DMRS) for PUSCH.

See 3GPP TS 36.211.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:DELTa:SS <value>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:DELTa:SS 0
Dependencies	None.
Preset	0
State Saved	Yes
Initial S/W Revision	A.20.01

PUSCH DM-RS Group/Sequence Hopping

Sets the PUSCH DM-RS hopping mode.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:HOPPing:TYPE OFF\|GROup\|SEQuence
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:HOPPing:TYPE OFF
Choices	Off, GroupHopping, SequenceHopping
Preset	Off
State Saved	Yes
Initial S/W Revision	A.20.01

UL CoMP Settings

PUSCH UL CoMP State

Turns UL CoMP on or off.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:COMP[:STATe] ON\|OFF\|1\|0
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:COMP:STATe OFF
Dependencies	When On, PUSCH ID and DMRS PUSCH CSH ID are available. When Off, these parameters are read-only. If this channel is assigned by a higher-layer (UL-SCH), this parameter is controlled by the higher layer as read-only. See 3GPP TS 36.211 and 36.311.
Preset	Off
State Saved	Yes
Initial S/W Revision	A.20.01

PUSCH ID

Sets a value for the PUSCH Identity (ID) used as virtual cell ID for UL CoMP.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:COMP:ID:PUSCh <value>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:COMP:ID:PUSCh 0
Dependencies	Available when UL CoMP State is On; read-only otherwise. If assigned by a higher-layer (UL-SCH), controlled by that layer as read-only. See 3GPP TS 36.211 and 36.311.
Preset	0
State Saved	Yes
Initial S/W Revision	A.20.01

PUSCH DMRS CSH ID

Sets a value used for cyclic shift hopping (CSH) initialization of the DMRS PUSCH pseudo-random sequence. Used for virtual cell ID.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUSCh<n>:COMP:ID:DMRS <value>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUSCh:COMP:ID:DMRS 0
Dependencies	Available when UL CoMP State is On; read-only otherwise. See 3GPP TS 36.211 and 36.311.
Preset	0
State Saved	Yes
Initial S/W Revision	A.20.01

PUCCH (Physical Uplink Control Channel)

The PUCCH carries uplink control information (UCI) such as ACK/NACK, SR, and CQI.

Configure PUCCH

Adds a new PUCCH physical channel.

Before adding, delete any channel or resource block group occupying the same resource blocks to avoid a code-conflicted error at waveform generation.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:ULINk:CONFig:PUCCh "<string>"
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:ULINk:CONFig:PUCCh "0;2;0;0;0;0;0;1;0"
Notes	The argument is a positional, semicolon-separated string of 9 fields (no keys): format;subframe;N_RB(2);N_CS(1);nPUCCH1;nPUCCH2;nPUCCH3;deltaShift;hopping format - PUCCH format index: 0 = Format 1, 1 = Format 1a, 2 = Format 1b, 3 = Format 2, 4 = Format 2a, 5 = Format 2b, 6 = Format 3 subframe - uplink subframe number (required) N_RB(2) - n_RB(2), number of RBs for Format 2 N_CS(1) - n_CS(1), number of cyclic shifts for Format 1 nPUCCH1 / nPUCCH2 - nPUCCH(1)/nPUCCH(2) resource index nPUCCH3 - nPUCCH(3) resource index(es), dot-separated list deltaShift - delta-shift (Δshift PUCCH) hopping - 0 = Off, 1 = Group, 2 = Sequence All fields except subframe are optional; omitted trailing fields use preset defaults. Before adding, delete any conflicting channel or RB group occupying the same resource blocks.
Preset	N/A
State Saved	Yes
Initial S/W Revision	A.20.01

Reconfigure PUCCH

Reconfigures an already-added PUCCH physical channel. Equivalent to opening the PUCCH Config dialog on an existing channel and clicking OK.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:ULINk:PCHannel:PUCCh:EDIT "<string>"
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:ULINk:PCHannel:PUCCh:EDIT "0;0;2;0;0;0;0;0;1;0"
Notes	The argument is a positional, semicolon-separated string whose first field is the channel index (0-based, among PUCCH channels), followed by the same 9 fields as Configure PUCCH: channelIdx;format;subframe;N_RB(2);N_CS(1);nPUCCH1;nPUCCH2;nPUCCH3;deltaShift;hopping channelIdx - 0-based index of the PUCCH to reconfigure (required). Targets standalone PUCCH; higher-layer PUCCH (created by UCI) cannot be reconfigured. (remaining fields same as Configure PUCCH)
Preset	N/A
State Saved	Yes
Initial S/W Revision	A.20.01

Delete PUCCH

Deletes the specified PUCCH physical channel and adjusts the identifying numbers of subsequent channels in the list.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:ULINk:PCHannel:DELete:PUCCh <integer>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:ULINk:PCHannel:DELete:PUCCh 1
Notes	The identifying numbers of subsequent channels are adjusted automatically. Targets standalone PUCCH; higher-layer PUCCH cannot be deleted directly.
Preset	N/A
State Saved	Yes
Initial S/W Revision	A.20.01

General

PUCCH Physical Channel Number

Query only

Displays the identifying number of this PUCCH physical channel. The number is assigned automatically based on the channel's position in the list.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:NUMBer?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:NUMBer?
Preset	N/A
State Saved	No
Initial S/W Revision	A.20.01

PUCCH State

Enables or disables this PUCCH physical channel instance.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:STATe ON\|OFF\|1\|0
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:STATe ON
Preset	On
State Saved	Yes
Initial S/W Revision	A.20.01

PUCCH Power

Sets the PUCCH power relative to the uplink carrier power.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:POWer <value>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:POWer 0
Preset	0 dB
State Saved	Yes
Min	-60 dB
Max	20 dB
Initial S/W Revision	A.20.01

PUCCH RNTI

Sets a value for the Radio Network Temporary Identifier (RNTI).

See 3GPP TS 36.211 and 36.321.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:RNTI? [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:RNTI <integer>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:RNTI? RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:RNTI 1
Dependencies	If a higher-layer transport channel (UCI) is assigned to this physical channel, this setting is read-only and the value refers to the corresponding transport channel RNTI. See 3GPP TS 36.211 and 36.321.
Preset	1
State Saved	Yes
Min	0
Max	65535
Initial S/W Revision	A.20.01

PUCCH Format

Selects the PUCCH format. The selected format determines the modulation type.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:FORMat F1\|F1A\|F1B\|F2\|F2A\|F2B\|F3
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:FORMat F1
Notes	Format 2/2a is not allowed when Extended CP is active. See 3GPP TS 36.211, 36.212 and 36.213.
Preset	F1
State Saved	Yes
Initial S/W Revision	A.20.01

PUCCH Modulation Type

Query only

Displays the modulation type corresponding to the selected PUCCH format. This field is read-only and updated automatically when the Format changes.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:MODulation?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:MODulation?
Dependencies	Read only. Derived from the Format setting: N/A (Format 1) BPSK (Format 1a) QPSK (Format 1b/2/3) QPSK+BPSK (Format 2a) QPSK+QPSK (Format 2b) See 3GPP TS 36.211, 36.212 and 36.213.
Preset	N/A
State Saved	No
Initial S/W Revision	A.20.01

PUCCH Resource Block Collection Numbers

Query only

Displays the numbers of the resource block collection(s) to which this PUCCH physical channel belongs.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:RBC?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:RBC?
Notes	A physical channel occupies one subframe (two slots) and therefore occupies two resource block collections.
Preset	N/A
State Saved	No
Initial S/W Revision	A.20.01

Higher Layer Data

Query only

Displays the data source of a higher-layer-controlled UL PUCCH Channel.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:HLAYer:DATA?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier:UL:PCH:PUCCh:HLAYer:DATA?
Preset	N/A
State Saved	No
Initial S/W Revision	A.20.01

PUCCH Data

Selects PN9, PN15, or User Defined Bits.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:DATA?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:DATA?
Preset	PN9
State Saved	Yes
Initial S/W Revision	A.20.01

Data User Defined

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:DATA:USER "<bitstring>" [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:DATA:USER?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier:UL:PCH:PUCCh:DATA:USER "00000000" RADio:LTETdd:WAVeform:CCARrier:UL:PCH:PUCCh:DATA:USER?
Preset	"00000000"
State Saved	Yes
Initial S/W Revision	A.20.01

PUCCH HARQ-ACK

Specifies the HARQ-ACK content for the PUCCH. Available selections are determined by the active PUCCH Format.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:HARQ ACK\|NACK\|ACKACK\|ACKNACK\|NACKACK\|NACKNACK\|ALLACK\|ALLNACK\|USER
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:HARQ ACK RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:HARQ?
Notes	Available values depend on the active format: Format 1/2: not applicable (field hidden). Format 1a/2a: ACK \| NACK. Format 1b/2b: ACKACK \| ACKNACK \| NACKACK \| NACKNACK. Format 3: ALLACK \| ALLNACK \| USER. For USER, set the 48 user-defined bits via …PUCCh<n>:HARQ:USER "<bits>".
Dependencies	Active for formats 1a, 1b, 2a, 2b, 3 only.
Preset	ACK
State Saved	Yes
Initial S/W Revision	A.20.01

PUCCH N1

Sets the PUCCH N1 resource index parameter.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:N1 <value>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:N1 0
Preset	0
State Saved	Yes
Initial S/W Revision	A.20.01

PUCCH Scrambling

Enables or disables PUCCH scrambling.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:SCRambling ON\|OFF\|1\|0
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:SCRambling ON
Preset	On
State Saved	Yes
Initial S/W Revision	A.20.01

PUCCH N_RB(2)

Sets a value for the PUCCH N_RB(2) number.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:NRB2 <value>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:NRB2 0
Preset	0
State Saved	Yes
Min	0
Max	109
Initial S/W Revision	A.20.01

PUCCH N_CS(1)

Sets a value for the PUCCH N_CS(1) number.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:NCS1 <value>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:NCS1 0
Preset	0
State Saved	Yes
Min	0
Max	7
Initial S/W Revision	A.20.01

PUCCH nPUCCH(2)

Specifies the resource index for PUCCH formats 2/2a/2b.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:N2 <value>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:N2 0
Notes	nPUCCH(2) < N_RB(2) * N_RB_SC * ceil(N_CS(1)/8) * (N_RB_SC - N_CS(1)*2). See 3GPP TS 36.211, 36.212 and 36.213.
Preset	0
State Saved	Yes
Min	0
Max	2047
Initial S/W Revision	A.20.01

PUCCH nPUCCH(3)

Specifies the resource index for PUCCH format 3.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:N3 <value>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:N3 0
Range	0 to (Number of RBs in system bandwidth) * 5 - 1 See 3GPP TS 36.211, 36.212 and 36.213.
Preset	0
State Saved	Yes
Min	0
Max	549
Initial S/W Revision	A.20.01

PUCCH Delta Shift

Sets a delta shift value used to calculate the cyclic shift alpha for the PUCCH.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:DSHift <value>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:DSHift 1
Preset	1
State Saved	Yes
Min	1
Max	3
Initial S/W Revision	A.20.01

PUCCH Resource Blocks

Query only

Displays the numbers of the resource blocks occupied by the PUCCH. Updated automatically when Format, N_RB(2), N_CS(1), nPUCCH(1/2), Delta Shift, or Group/Sequence Hopping changes.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:RBLock?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:RBLock?
Preset	0,49
State Saved	No
Initial S/W Revision	A.20.01

PUCCH DMRS Power

Sets the power level, in dB for the PUCCH DM-RS relative to the carrier power.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:DMRSignal:POWer <rel_ampl>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:DMRSignal:POWer 0
Preset	0.000 dB
State Saved	Yes
Min	-60
Max	20
Initial S/W Revision	A.20.01

PUCCH Group/Sequence Hopping

Selects the hopping type for PUCCH.

See 3GPP TS 36.211.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:HOPPing:TYPE OFF\|GROup\|SEQuence
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:HOPPing:TYPE OFF
Preset	Off
State Saved	Yes
Initial S/W Revision	A.20.01

UL CoMP Settings

PUCCH UL CoMP State

Turns UL CoMP on or off.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:COMP[:STATe] ON\|OFF\|1\|0
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:COMP:STATe OFF
Dependencies	When On, PUCCH ID is available to set. When Off, PUCCH ID is read-only. If this channel is assigned by a higher-layer (UCI), this parameter is controlled by that layer as read-only. See 3GPP TS 36.211 and 36.311.
Preset	Off
State Saved	Yes
Initial S/W Revision	A.20.01

PUCCH ID

Sets a value for the PUCCH Identity (ID) used as virtual cell ID for UL CoMP.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:PCH:PUCCh<n>:COMP:ID:PUCCh <value>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:PCH:PUCCh:COMP:ID:PUCCh 0
Dependencies	Available when UL CoMP State is On; read-only otherwise. If assigned by a higher-layer (UCI), controlled by that layer as read-only. See 3GPP TS 36.211 and 36.311.
Preset	0
State Saved	Yes
Min	0
Max	509
Initial S/W Revision	A.20.01